Ethical Research Practice Essay Example | Topics and Well Written Essays - 500 words

Ethical Research Practice - Essay Example There is considerable concern about consent issues in relation to groups perceived as 'vulnerable', i.e., where individuals have difficulties in giving initial and continued informed consent because of issues of 'competence'. Groups who are perceived as vulnerable include children and young people, people with mental health problems and people with learning disability. Ethics Committees generally ask that special consideration is given to the ways in which 'vulnerable groups' are accessed and give consent to participate in research to ensure that they understand what participation involves and are not coerced into taking part. The expectation is generally that the researcher should justify the importance of the research and the need to include 'vulnerable' populations and should identify the means whereby informed consent will be obtained - in many cases there will be an expectation that proxy consent (from a parent or relative) may be used to supplement the consent or assent from th e individual who is not seen as competent to give consent in their own right (Baez 2002). It has been argued that researchers should seek consent each time they collect data from a study participant to ensure that they are aware that data are being collected and that they are willing to continue participating in the study.

Dynamic Function Relationships Research Paper Example | Topics and Well Written Essays - 1250 words

Dynamic Function Relationships - Research Paper Example The study correlated the mechanical strength as measured by F-max with the thermal stability as measured by Tm, Cm, etc. Introduction Atomic force microscopy, the optical tweezers, alongside other nanotechnology tools has made it possible to induce and monitor large conformational changes in biomolecules. These studies are often performed in helping asses the biomolecules structure, their elastic properties, as well as their ability to work as nanomachines in cells. Stretching studies on protein have increasingly become of particular interest and they have been done in systems more than a hundred. All-atom simulation, such as those reported in refs, has helped the interpretation of such experiments possible. However, they have been limited by order 100 ns time scales. They, thus, need the use of large constant pulling speeds, which are quite unrealistic and elucidate the nature of a force clamp (region that is responsible for the force of pulling, which is the largest) Fmax. It is wo rthwhile noting that virtually all the all-atom, and experimental simulational studies merely address a small fraction of the proteins that are often stored within the Protein Data Bank (PDB). It is, thus, worth considering a large set of proteins in order to determine their largest force of resistance to pulling in any model that allows fast and accurate calculations. In this task, the structure-based model of proteins pioneered by collaborators of Go and applicable is implemented in many projects, seem to be most suitable. This is because the proteins are well defined in respect to the native structure. There are various ways of constructing a structure-based model of proteins. However, their variances differ in the choice of their effective potential, the nature of their local backbone stiffness, course-grained degrees of freedom, and the energy related parameters. The crucial choice concerns making a decision about the interaction between the Count of amino acids as native conta cts. Research has shown that organism often try to adapt their proteins in order to function more effectively within their range of environmental temperature. This implies that proteins, in general, have a certain limited temperature range in which the structural range is maintained. Anything that lies outside this specific thermal span causes denaturalization to occur with the corresponding function loss, such as the enzyme activity. Changing the intrinsic thermal stability of proteins can be achieved through alteration of the amino acids or otherwise extrinsically through addition of the suitable stabilizing effectors such as coenzymes, peptides, cations, and membranes. This paper deals with the mechanical strength of proteins and their thermal stability with a focus on making comparison between the two. In order to appropriately make comparison between the mechanical strength of proteins and their thermal stability, there was need to correlation Cm, Tm, and normalized B-factor an d F-max. In this regard, a mode of experiment B-factors from the PDB database, the experimental lists of protein resilience, single molecule pulling, and protein motion by ANM were used in this study. Materials and Methods The design method to be applied in this study would be a quantitative research design. In social sciences, quantitative research is used to refer to systematic investigation of a phenomenon through a computation technique. The aim of the quantitative

The Collections Of Early Museums Cultural Studies Essay

The Collections Of Early Museums Cultural Studies Essay Early museums began as the private collections of wealthy individuals, families or institutions of art and rare or curious natural objects and artifacts. These were often displayed in so-called wonder rooms or cabinets of curiosities. Public access was often possible for the respectable, especially to private art collections, but at the whim of the owner and his staff. The first public museums in the world opened in Europe during the 18th century and the Age of Enlightenment: the Amerbach Cabinet, originally a private collection, was bought by the university and city of Basel in 1661 and opened to the public in 1671. the Royal Armouries in the Tower of London is the oldest museum in the United Kingdom. It opened to the public in 1660, though there had been paying privileged visitors to the armouries displays from 1592. Today the museum has three sites including its new headquarters in Leeds.[2] the Musà ©e des Beaux-Arts et darchà ©ologie in Besanà §on was established in 1694 after Jean-Baptiste Boisot, an abbot, gave his personal collection to the Benedictines of the city in order to create a museum open to the public two days every week.[3] the Museo Sacro, the first museum in the Vatican Museums complex, was opened in Rome in 1756[citation needed] the British Museum in London, was founded in 1753 and opened to the public in 1759.[4] Sir Hans Sloanes personal collection of curios provided the initial foundation for the British Museums collection.[4] the Uffizi Gallery in Florence, which had been open to visitors on request since the 16th century, was officially opened to the public 1765[citation needed] the Belvedere Palace of the Habsburg monarchs in Vienna opened with a collection of art in 1781[citation needed] Louvre in Paris France. The Mona Lisa Painting by Leonardo Da Vinci resides in the Louvre. These public museums, however, were often accessible only by the middle and upper classes. It could be difficult to gain entrance. In London for example, prospective visitors to the British Museum had to apply in writing for admission. Even by 1800 it was possible to have to wait two weeks for an admission ticket. Visitors in small groups were limited to stays of two hours. In Victorian times in England it became popular for museums to be open on a Sunday afternoon (the only such facility allowed to do so) to enable the opportunity for self improvement of the other working classes. The first truly public museum was the Louvre Museum in Paris, opened in 1793 during the French Revolution, which enabled for the first time in history free access to the former French royal collections for people of all stations and status. The fabulous art treasures collected by the French monarchy over centuries were accessible to the public three days each dà ©cade (the 10-day unit which had replaced the week in the French Republican Calendar). The Conservatoire du musà ©um national des Arts (National Museum of Artss Conservatory) was charged with organizing the Louvre as a national public museum and the centerpiece of a planned national museum system. As Napolà ©on I conquered the great cities of Europe, confiscating art objects as he went, the collections grew and the organizational task became more and more complicated. After Napoleon was defeated in 1815, many of the treasures he had amassed were gradually returned to their owners (and many were not). His plan was never ful ly realized, but his concept of a museum as an agent of nationalistic fervor had a profound influence throughout Europe. American museums eventually joined European museums as the worlds leading centers for the production of new knowledge in their fields of interest. A period of intense museum building, in both an intellectual and physical sense was realized in the late 19th and early 20th centuries (this is often called The Museum Period or The Museum Age). While many American museums, both Natural History museums and Art museums alike, were founded with the intention of focusing on the scientific discoveries and artistic developments in North America, many moved to emulate their European counterparts in certain ways (including the development of Classical collections from ancient Egypt, Greece, Mesopotamia and Rome). Universities became the primary centers for innovative research in the United States well before the start of the Second World War. Nevertheless, museums to this day contribute new knowledge to their fields and continue to build collections that are useful for both research and display. Purpose Museums collect and care for objects of scientific, artistic, or historical importance and make them available for public viewing through exhibits that may be permanent or temporary. Most large museums are located in major cities throughout the world and more local ones exist in smaller cities, towns and even the countryside. Many times, museums concentrate on the host regions culture. Although most museums do not allow physical contact with the associated artifacts, there are some that are interactive and encourage a more hands-on approach. Modern trends in museology have broadened the range of subject matter and introduced many interactive exhibits, which give the public the opportunity to make choices and engage in activities that may vary the experience from person to person. With the advent of the internet, there are growing numbers of virtual exhibits, i.e. web versions of exhibits showing images and playing recorded sound. Museums are usually open to the general public, sometimes charging an admission fee. Some museums are publicly funded and have free entrance, either permanently or on special days, e.g. once per week or year. Museums are usually not run for the purpose of making a profit, unlike private galleries which more often engage in the sale of objects. There are governmental museums, non-governmental or non-profit museums, and privately owned or family museums. Museums can be a reputable and generally trusted source of information about cultures and history. Definitions include: permanent institution in the service of society and of its development, open to the public, which acquires, conserves, researches, communicates and exhibits the tangible and intangible heritage of humanity and its environment, for the purposes of education, study, and enjoyment, by the International Council of Museums;[5] and Museums enable people to explore collections for inspiration, learning and enjoyment. They are institutions that collect, safeguard and make accessible artifacts and specimens, which they hold in trust for society, by the UK Museums Association.[6] Types Types of museums vary, from very large collections in major cities, covering many of the categories below, to very small museums covering either a particular location in a general way, or a particular subject, such as an individual notable person. Categories include: fine arts, applied arts, craft, archaeology, anthropology and ethnology, history, cultural history, military history, science, technology, childrens museums, natural history, numismatics, botanical and zoological gardens and philately. Within these categories many museums specialize further, e.g. museums of modern art, local history, aviation history, agriculture or geology. A museum normally houses a core collection of important selected objects in its field. Objects are formally accessioned by being registered in the museums collection with an artifact number and details recorded about their provenance. The persons in charge of the collection and of the exhibits are known as curators. Archaeology museums Archaeology museums specialize in the display of archaeological artifacts. Many are in the open air, such as the Acropolis of Athens and the Roman Forum. Others display artifacts found in archaeological sites inside buildings. Art museums Main article: Art museum Museum of Modern Art An Art museum, also known as an art gallery, is a space for the exhibition of art, usually in the form of art objects from the visual arts, primarily paintings, illustrations, and sculpture. Collections of drawings and old master prints are often not displayed on the walls, but kept in a print room. There may be collections of applied art, including ceramics, metalwork, furniture, artists books and other types of object. Video art is often screened. The first publicly owned museum in Europe was the Amerbach-Cabinet in Basel, originally a private collection sold to the city in 1661 and public since 1671 (now Kunstmuseum Basel).[7] The Uffizi Gallery in Florence was initially conceived as a palace for the offices of Florentian magistrates (hence the name), it later evolved into a display place for many of the paintings and sculpture collected by the Medici family or commissioned by them. After the house of Medici was extinguished, the art treasures remained in Florence, forming one of the first modern museums. The gallery had been open to visitors by request since the sixteenth century, and in 1765 it was officially opened to the public. Another early public museum was the British Museum in London, which opened to the public in 1759.[4] It was a universal museum with very varied collections covering art, applied art, archaeology, anthropology, history, and science, and a library. The science collections, library, paintings and mod ern sculpture have since been found separate homes, leaving history, archaeology, non-European and pre-Renaissance art, and prints and drawings.[citation needed] The specialised art museum is considered a fairly modern invention, the first being the Hermitage in Saint Petersburg which was established in 1764.[citation needed] The Louvre in Paris was established in 1793, soon after the French Revolution when the royal treasures were declared for the people.[8] The Czartoryski Museum in Krakà ³w was established in 1796 by Princess Izabela Czartoryska.[9] This showed the beginnings of removing art collections from the private domain of aristocracy and the wealthy into the public sphere, where they were seen as sites for educating the masses in taste and cultural refinement. History museums Museum of the Filipino People, Manila History museums cover the knowledge of history and its relevance to the present and future. Some cover specialized curatorial aspects of history or a particular locality; others are more general. Such museums contain a wide range of objects, including documents, artifacts of all kinds, art, archaeological objects. Antiquities museums specialize in more archaeological findings. A common type of history museum is a historic house. A historic house may be a building of special architectural interest, the birthplace or home of a famous person, or a house with an interesting history. Historic sites can also become museums, particularly those that mark public crimes, such as Tuol Sleng Genocide Museum or Robben Island. Another type of history museum is a living museum. A living museum is where people recreate a time period to the fullest extent, including buildings, clothes and language. It is similar to historical reenactment. See also: Medical History Museum (disambiguation) Maritime museums Main article: Maritime museum Maritime museums specialize in the display of objects relating to ships and travel on seas and lakes. They may include a historic ship (or a replica) made accessible as a museum ship. Military and war museums Category:Military and war museums The Canadian War Museum Military museums specialize in military histories; they are often organized from a national point of view, where a museum in a particular country will have displays organized around conflicts in which that country has taken part. They typically include displays of weapons and other military equipment, uniforms, wartime propaganda and exhibits on civilian life during wartime, and decorations, among others. A military museum may be dedicated to a particular service or area, such as the Imperial War Museum Duxford for military aircraft or the Deutsches Panzermuseum for tanks, or more generalist, such as the Canadian War Museum or the Musà ©e de lArmà ©e. Mobile museums Mobile museum is a term applied to museums that make exhibitions from a vehicle, such as a van. Some institutions, such as St. Vital Historical Society and the Walker Art Center, use the term to refer to a portion of their collection that travels to sites away from the museum for educational purposes. Other mobile museums have no home site, and use travel as their exclusive means of presentation. Natural history museums For a more comprehensive list, see List of natural history museums The National Museum of Natural History in Washington, D.C. Museums of natural history and natural science typically exhibit work of the natural world. The focus lies on nature and culture. Exhibitions may educate the masses about dinosaurs, ancient history, and anthropology. Evolution, environmental issues, and biodiversity are major areas in natural science museums. Notable museums of this type include the Natural History Museum in London, the Oxford University Museum of Natural History in Oxford, the Musà ©um national dhistoire naturelle in Paris, the Smithsonian Institutions National Museum of Natural History in Washington, D.C., the American Museum of Natural History in New York City, the Royal Tyrrell Museum of Palaeontology in Drumheller, Alberta, Denver Museum of Nature and Science and the Field Museum of Natural History in Chicago. A rather minor Natural history museum is The Midwest Museum of Natural History is located in Sycamore, Illinois. Open air museums Main article: Open air museum An old farmhouse at the Salzburger Freilichtmuseum in Großgmain near Salzburg. Open air museums collect and re-erect old buildings at large outdoor sites, usually in settings of re-created landscapes of the past. The first one was King Oscar IIs collection near Oslo in Norway, opened in 1881 and is now the Norsk Folkemuseum.[citation needed] In 1891 Artur Hazelius founded the Skansen in Stockholm,[citation needed] which became the model for subsequent open air museums in Northern and Eastern Europe, and eventually in other parts of the world. Most open air museums are located in regions where wooden architecture prevail, as wooden structures may be translocated without substantial loss of authenticity.[citation needed] A more recent but related idea is realized in ecomuseums, which originated in France.[citation needed] Science museums For a more comprehensive list, see List of science museums Museum of Science and Industry Science museums and technology centers revolve around scientific achievements, and marvels and their history. To explain complicated inventions, a combination of demonstrations, interactive programs and thought-provoking media are used. Some museums may have exhibits on topics such as computers, aviation, railway museums, physics, astronomy, and the animal kingdom. Science museums, in particular, may consist of planetaria, or large theatre usually built around a dome. Museums may have IMAX feature films, which may provide 3-D viewing or higher quality picture. As a result, IMAX content provides a more immersive experience for people of all ages. Also new virtual museums, known as Net Museums, have recently been created. These are usually web sites belonging to real museums and containing photo galleries of items found in those real museums. This new presentation is very useful for people living far away who wish to see the contents of these museums. Specialized museums Museum of Toys and Automata in Verdà º, Spain A number of different museums exist to demonstrate a variety of topics. Music museums may celebrate the life and work of composers or musicians, such as the Rock and Roll Hall of Fame in Cleveland, Ohio, or even Rimsky-Korsakov Apartment and Museum in St Petersburg (Russia). Other music museums include live music recitals such as the Handel House Museum in London. In Glendale, Arizona, The Bead Museum[10] fosters the appreciation and understanding of the global historical, cultural and artistic significance of beads and related artifacts. The permanent collection includes beads from around the globe including a 15,000 year old bead. Temporary exhibits are also available. Museums targeted for the youth, such as childrens museums or toy museums in many parts of the world, often exhibit interactive and educational material on a wide array of topics, for example, the Museum of Toys and Automata in Spain. The National Baseball Hall of Fame and Museum is an institution of the sports category. The Corning Museum of Glass is devoted to the art, history, and science of glass. The National Museum of Crime Punishment explores the science of solving crimes. The Great American Dollhouse Museum in Danville, Kentucky, U.S.A., is depicts American social history in miniature.[11] Interpretation centres are modern museums or visitors centres that often use new means of communication with the public. In some cases, museums cover an extremely wide range of topics together, such as the Museum of World Treasures in Wichita, KS. Virtual museums A recent development, with the expansion of the web, is the establishment of virtual museums. Online initiatives like the Virtual Museum of Canada[12] provide physical museums with a web presence, as well as online curatorial platforms such as Rhizome.[13] Some virtual museums have no counterpart in the real world, such as LIMAC (Museo de Arte Contemporà ¡neo de Lima),[14] which has no physical location and might be confused with the citys own museum. The art historian Griselda Pollock elaborated a virtual feminist museum, spreading between classical art to contemporary art.[15] Some real life museums are also using the internet for virtual tours and exhibitions. On March 23, Whitney Museum in New York organized what it called the first ever online Twitter museum tour. Zoological parks and botanic gardens Zoos are considered living museums Main article: Zoo Although zoos and botanic gardens are not often thought of as museums, they are in fact living museums. They exist for the same purpose as other museums: to educate, inspire action, and to study, develop and manage collections. They are also managed much like other museums and face the same challenges. Notable zoos include the Bronx Zoo in New York, the London Zoo, the Philadelphia Zoo, the Saint Louis Zoological Park, the San Diego Zoo, Berlin Zoological Garden, the Taronga Zoo in Sydney, Frankfurt Zoological Garden, Jardin des Plantes in Paris, and Zà ¼rich Zoologischer Garten in Switzerland. Notable botanic gardens include Royal Botanic Gardens Kew, Missouri Botanical Garden in St. Louis, Brooklyn Botanic Garden, Chicago Botanic Garden and Royal Botanical Gardens (Ontario). Controversies The neutrality of this section is disputed. Please see the discussion on the talk page. Please do not remove this message until the dispute is resolved. (July 2010) The Guggenheim (New York) Controversies have arisen recently regarding artifacts being damaged or being exposed to high risk of damage whilst on loan. For example, an ancient Egyptian stone lion on loan from the British Museum was being manually carried down a flight of stairs (as shown in a BBC Television documentary 2007). The supervisor in charge advised the people carrying it if it starts to fall, let it drop.[citation needed] The irony is that these artifacts have been carefully excavated and transported, often thousands of miles, without damage. Once arriving at a museum the artifact usually does not receive the same level of care and attention that it received whilst being excavated and transported.[citation needed] Another example of this is the recent return of a Terracotta Army horse on loan from a museum in Rome, which showed the item to be damaged on return.[citation needed] As yet, there is no internationally agreed protocol for a level or standard of care of artifacts on display or on loan from museums. Like any institution dedicated to the memorialization of the past, museums play a substantial role in the construction of ideologies and identities, which is accomplished through a variety of means, though these typically pertain to the particular ways in which the past is put on public display. Museums serve to standardize our views of the past by the following means: failing to account for matters of historical (or more accurately, historiographical) dispute; by not providing alternative viewpoints by presenting the past in terms of a coherent, linear, unified narrative by creating complex audio, visual and textual experiences, in which the observer is overwhelmingly confronted by the massive weight of all the physical evidence: the photos, the facts, the personal vignettes-after being penetrated in such an intimate way by a holistic bodily experience, observers are then typically directed to gift shops, where they are likely encouraged to purchase books which can help to further reinforce the desired indoctrination of the museums particular ideology they present a view of history based often based upon the romanticization of the achievements of great men, brilliant thinkers, cultural or scientific innovators, war heroes (and their technologies) As is self-evident to the seasoned traveler, most national museums around the world adhere to the same basic structural patterns, whereby the past is divided up into a series of epochs, beginning with prehistory, then passing through the ancient and medieval worlds until finally arriving at the nations present. This view of the history is plainly teleological, which is to say that the past is depicted as a series of trends and developments aiming at the present condition. The point is often under-emphasized by those who love museums that a sizable percentage of museum artifacts have been acquired unethically (if ethics are defined in a Kantian sense at least). The government of Egypt for instance has consistently pressed the British Museum in London to return the enormous holdings of pharaonic objects seized by British (though not exclusively British) archaeologists during Britains period of colonial administration in Egypt, which began officially in 1882. The National Museum of Iraq was created during the British Mandate period through the efforts of colonial officer and Oriental Secretary of the short-lived British Mandate, Gertrude Bell.[citation needed] Management Vatican Museums The museum is usually run by a director, who has a curatorial staff that cares for the objects and arranges their display. Large museums often will have a research division or institute, which are frequently involved with studies related to the museums items, as well as an education department, in charge of providing interpretation of the materials to the general public. The director usually reports to a higher body, such as a governmental department or a board of trustees. Objects come to the collection through a variety of means. Either the museum itself or an associated institute may organize expeditions to acquire more items or documentation for the museum. More typically, however, museums will purchase or trade for artifacts or receive them as donations or bequests. Miami Art Museum in Miami, Florida For instance, a museum featuring Impressionist art may receive a donation of a Cubist work which simply cannot be fit into the museums exhibits, but it can be used to help acquire a painting more central to the museums focus. However, this process of acquiring objects outside the museums purview in order to acquire more desirable objects is considered unethical by many museum professionals. Larger museums may have an Acquisitions Department whose staff is engaged full time for this purpose. Most museums have a collections policy to help guide what is and is not included in the collection. Museums often cooperate to sponsor joint, often traveling, exhibits on particular subjects when one museum may not by itself have a collection sufficiently large or important. These exhibits have limited engagements and often depend upon an additional entry fee from the public to cover costs. Museum planning Museum planning  and Interpretive planning Sà £o Paulo Museum of Art in Sà £o Paulo, Brazil. The design of museums has evolved throughout history. Interpretive museums, as opposed to art museums, have missions reflecting curatorial guidance through the subject matter which now include content in the form of images, audio and visual effects, and interactive exhibits. Museum creation begins with a museum plan, created through a museum planning process. The process involves identifying the museums vision and the resources, organization and experiences needed to realize this vision. A feasibility study, analysis of comparable facilities and an interpretive plan are all developed as part of the museum planning process. Some museum experiences have very few or no artifacts and do not necessarily call themselves museums; the Griffith Observatory in Los Angeles and the National Constitution Center in Philadelphia, being notable examples where there are few artifacts, but strong, memorable stories are told or information is interpreted. In contrast, the United States Holocaust Memorial Museum in Washington, D.C. uses many artifacts in their memorable exhibitions. Notably, despite their varying styles, the latter two were designed by Ralph Appelbaum Associates. Exhibition design Article: Exhibit design Most mid-size and large museums employ exhibit design staff for graphic and environmental design projects, including exhibitions. In addition to traditional 2-D and 3-D designers and architects, these staff departments may include audio-visual specialists, software designers, audience research and evaluation specialists, writers, editors, and preparators or art handlers. These staff specialists may also be charged with supervising contract design or production services. The exhibit design process builds on the interpretive plan for an exhibit, determining the most effective, engaging and appropriate methods of communicating a message or telling a story. The process will often mirror the architectural process or schedule, moving from conceptual plan, through schematic design, design development, contract document, fabrication and installation. Etymology The English museum comes from the Latin word, and is pluralized as museums (or rarely, musea). It is originally from the Greek ÃŽÅ“ÃŽÂ ¿Ãƒ Ã¢â‚¬ ¦Ãƒ Ã†â€™ÃƒÅ½Ã‚ µÃƒ ¡Ã‚ ¿-ÃŽÂ ¿ÃƒÅ½Ã‚ ½ (Mouseion), which denotes a place or temple dedicated to the Muses (the patron divinities in Greek mythology of the arts), and hence a building set apart for study and the arts,[16] especially the Musaeum (institute) for philosophy and research at Alexandria by Ptolemy I Soter about 280 BCE.[17] The first museum/library is considered to be the one of Plato in Athens.[18] However, Pausanias gives another place called Museum, namely a small hill in Classical Athens opposite the Akropolis. The hill was called Mouseion after Mousaious, a man who used to sing on the hill and died there of old age and was subsequently buried there as well.[19] Most visited museums Main article: List of most visited art museums in the world Audio tour Cell phone tour Museum education Exhibition history Fire Museum Green museum International Museum Day (May 18) List of museums List of transport museums Police Museum Postal museum Public memory Virtual Library museums pages

Essays --

Night Comparison Paper Rough Draft The Italian Jews were among the luckiest Jews during their time. The Italian Jewish community, one of the oldest in Europe, numbered about 50,000 in 1933. They were accepted as important members of the society and were successful in the military, politics, and many more skill professions. Everything went downhill when Benito Mussolini’s government asked the non-Jewish community to turn on their Jewish neighbors, but most of the population said no. As a result, a higher percentage of Italian Jews were saved than in very country except for Denmark. The Italians turned there back on the government, as Italy was allies with Germany but the citizens opposed the Nazi party. This resulted in many Italian-Jews being rescued. Throughout Night and Survival in Auschwitz, both Elie Wiesel and Primo Levi both experienced harsh living conditions under the Nazis. When Elie first arrived at Auschwitz, he witnessed something unforgettable, which was the burning of live infants, which resulted in huge amounts of smoke. He described this day as, "Never shall I forget that night . . ." This was only the beginning as Elie experienced the dehumanization, by being fed a little a day, being forced to work long hours and being crammed in small beds and trains. Throughout his time in camp, Elie had no luxury of showering or taking breaks but on the other hand he was forced to work as a slave. This was no difference for Primo, who experienced a little too. At Fossoli, he was given nothing to drink for four days. Which is torture! Things get worse when he arrives in Auschwitz, as he gets his head shaved, forced to take showers whit no room, and tattooed with numbers. He described it, as â€Å"everything around us speaks of a ... ... of personality but obviously this was not present. Elie and the prisoners struggled to maintain human character traits. Both Levi and Elie experienced the struggle to remain human. Primo Levi’s perspective of the Holocaust really went into detail about the tragic events. I really got a better knowledge of the treatment of the prisoners. Words such as â€Å"terrible† and â€Å"inhumane† were mentioned a lot to describe the treatment by the Nazis. In addition, Primo Levi also touches on how morals and values were thrown aside for survival. This is an interesting topic, which caught my attention. Prisoners during the Holocaust threw their religion aside, which was present in Elie and Primo. They started doubting the existence of a God and started doing things for their own good. Primo Levi really went in depth about the Holocaust and gave me a different perspective.

Civils rights and liberties

Explain why conceptions civil rights or liberties (choose only one) which are supposed to be granted to all under the constitution, changed so greatly In the second half of the twentieth century. Make sure to discuss the court's role in this shift. A civil right Is a right or privilege that represents protections by government power or things government must secure on behalf of its citizens. Examples of civil rights are freedom of speech, press, and assembly; the right to vote; freedom from Involuntary servitude; and the right to equality In public places.Discrimination ccurs when the civil rights of an individual are denied or interfered with because of their membership In a particular group or class. Various Jurisdictions have enacted statues to prevent discrimination based on a person's race, sex, religion, age, previous condition of servitude, physical limitation, national origin, and sexual orientation. In American history, there are so many clvll rights movements in the second half of the twentieth century and Congress enacted numerous civil rights statues. Many of these are still in force today and protect Individuals from discrimination and from the deprivation of their civil rights.If we want to talk about civil rights of America, we cannot skip a famous person, Martin Luther King. He is a great leader of human rights In American history. He makes himself reasonable to help people of Birmingham fighting against racial discrimination. For example, King says, â€Å"l am In Birmingham because injustice Is here. † In 1963, he gathered a lot of people in Washington DC and gave his famous â€Å"l have a dream† speech. He inspired his followers; passions and triggered their eagerness to listen to his solutions to unjust situations. Declared in US Constitution, every American is guaranteed civil rights.I think it was not until 1791, that the Bill of Rights was appended to the constitution, which helped clarify these rights to citizens. The famous Dawood stated that rights were eventually applied against actions of the state governments in a series of cases decide by the Supreme Court. Actually, In previous years, Supreme Court had little say in decisions being made by government. As time went on, the Supreme Court took on more responsibility and started making additional decisions, which In time helped minorities gain their civil rights. In 1954, the landmark trial Brown vs. theBoard of Educauon of Topeka Kansas ruled that segregation In public education was unfair. â€Å"We conclude unanimously that in the field of public education the doctrine of Separate but equal' has no place. Separate educational facilities are inherently unequal. † Many African-Americans waited to hear this quote from Chief Justice Earl Warren after many years of fighting for better educational opportunities by means of school desegregation. That decision changed American history and culture forever. Till this day, it effects our school system s and without that decision changed, who knows what could have and what could have not happened. n civils rights and liberties By ryanheinl to be granted to all under the constitution, changed so greatly in the second half of A civil right is a right or privilege that represents protections by government involuntary servitude; and the right to equality in public places. Discrimination their membership in a particular group or class. Various Jurisdictions have enacted orientation. In American history, there are so many civil rights movements in the statues. Many of these are still in force today and protect individuals from Martin Luther King. He is a great leader of human rights in American history.He discrimination. For example, King says, â€Å"l am in Birmingham because injustice is here. † In 1963, he gathered a lot of people in Washington D. C and gave his famous â€Å"l decide by the Supreme Court. Actually, in previous years, Supreme Court had little took on more resp onsibility and started making additional decisions, which in time Board of Education of Topeka Kansas ruled that segregation in public education was of ‘separate but equal' has no place.

Living at Home and Living Away from Home

Nowadays, most students study at a university after graduating from high school. Due to the distance between their hometowns and colleges, a few students live with their family while many others live far away from home, and the most of them think about living away from home as the best part in their lives because they will have more freedom and that can be really exciting for them. However, they do not realize that living at home has more benefits compared to living away from home. Firstly, I prefer living at home, because students who are living at home can enjoy better living conditions than ones living far from home. As home is the whole family’s place, it is normally large and well-equipped with many electric devices. Also, the work required to keep a home clean tends to go unnoticed when the mother does it. Clean floors, tidy rooms, and fresh laundry tend to be taken for granted. Even though the average teenager may help around the house one of the parents tends to do most of the housework. The floor is always clean, the rooms are always tidy, and laundry is never less than fresh and neatly folded. In addition, students are provided with fresh, nutritious food. On the contrary, dormitory or a rented house are usually small with poor facilities. For example, many students living in a cramped rented house have to use one small space for cooking, eating, learning and sleeping. Also the laundry will pile high and become a daunting task for them to achieve. The back door step will be dirty, and the rooms will become cluttered. Owing to busy learning, students may skip their meals or eat fast food, which badly influences their health. Secondly, living at home differs from living far away in that it helps students avoid financial problems. Living at home, students have the telephone bills, electricity bills and other daily expenses paid by their parents. Also living at home with parents makes bills appear as some fictional scary story. The most a students usually pays for is a car to drive, and a few other luxuries. The parents pay for the water left dripping, the gas burnt by the stove, and the power consumed by the light left on. Students living at home will never even notice any of these expenses. In contrast students living far from home have to pay all those things on their own with a monthly amount of money. Unlike students who receive parents’ instruction, students who do not live with their family often lack financial managing skills. As a result, they often spend money on unnecessary items and cope with running out of money. Another difference is the emotional aspect that you have to face. Living at home can result less frustrating than living alone because you can share the problems that you have with your parents, siblings or any member of your family in order to look for some solutions to difficult situations that you may face. In contrast, if you live away from home most of the time you are going to be alone, so finding someone who wants to listen your problems can be difficult to get. Your friends are going to be the only people that might help you to solve your problems. However, they are not your relatives and sometimes they are not going to be with you. The fourth difference between living at home and away from home is the environmental issue. Life at home is secure and well known. Furthermore, home is where one has lived their entire life and they are well adapted to the surroundings. On the other hand, the new home can be in a complete different neighborhood or city. Also, it’s not always similar to the home people are used to since the new house is usually smaller, less fancier, and it’s usually located in a less attractive neighborhood than the parents’ home. While the students who choose to leave home may think that it’s not a big deal to confront a decrease in their living status, those that choose to stay home might think that the difference in the environment is a major drawback. Finally, the other obvious difference is that living far from home provides students more independence than living at home. It goes without saying that parents want to take good care of children by setting a wide range of rules for them. Moreover, when you have an important meeting and it is impossible for you get home, you can stay at a friend’s house without problems. Consequently, students living with family have to ask for their parents’ permission if they want to go out or invite friends to their homes. Additionally, parents also control their time spent on using computer and TV. In contrast, students living without parents’ control have more privacy ecause they do not have to obey the strict rules. They can go out whenever they want and freely gather with their friends. Thanks to independent life, they can flexibly spend time on learning, surfing websites or playing games without any complaints. In general, though living at home and living far away from home have some considerable differences, each type has its own advantages and disadvantages to students, and at some moment in life you have to decide between staying at home with your parents as you have always done or starting a new life alone that means being independent. At the moment that you want to make a choice between these two styles of life. You should know that living at home and living away from home has some similarities and some differences that you have to consider before making a decision. Therefore, no matter what kinds of living students choose, they can still enjoy their wonderful life at college.

The Girl Next Door essays

The Girl Next Door essays The Girl next door is a hard movie not to like, its a raunchy good charmed teenage movie. Its not hard to see why it is so successful: it is the rare teen movie that manages to be funny and sincere without going to far. If you compare The Girl Next Door to the movie, American Pie, even though American Pie is very popular it resorts to the style of gross humour. The Girl Next door has a lot of adult situations just like American Pie but its better natured, there isnt a eww moment to be found. Matthew, played by Emile Hirsch is a high school senior, the president of the school government and an all-around nice guy. He only has a couple of friends and compared to everyone else at school hes a nerd. He's recently been accepted to Georgetown University, and is a finalist for a scholarship. But when he goes to fill out his yearbook quote at the very beginning of the movie "What I will never forget about high school is...", he realizes he has nothing to remember because he hasnt done anything outrageous or out of the ordinary. All this changes when Danielle moves in next door, which of course is, The girl next door. He watches her first walk into the house then from his room he can see her getting unchanged, she is absolutely beautiful. She saw him looking and then comes over and asks his parents if she can be shown around the town by Matthew. She then embarrasses him by forcing him to strip in the middle of the street while she shines the car lights onto him. They begin to spend time together, and soon they are going out. Their first kiss stands out strongest, Danielle persuades Matt to go to a school party where he is not invited. Matthew gets told to leave, and Danielle is being talked up by a jock. Matthew then stands there and you can tell he is thinking about what to do. Then he does something he wouldnt usually do, he strolls up to Danielle and j ...

Change Someones Life for the Better Essays

Change Someones Life for the Better Essays Change Someones Life for the Better Essay Change Someones Life for the Better Essay I can change someones life for the better by simply discussing the awareness of cancer. Cancer is the number two most threatening disease that is killing our people. It is very important for our people to know this disease and come up with a resolution on defeating this disease once and for all. There has to be a cure on cancer. The more we know the more greater chance that there is a cure. In the U. S. National Cancer institutes Surveillance Epidemiology and End Results (SEER) database for 2006 said that the estimates show in all invasive cancer the total of 11,0280. 00 ;for males it show the amount of 5,116,000 and for females 5,912,000. Many people need to understand that it is affecting us as humans. Also I came across the Global Cancer Facts and Figures on cancer. org and according to american cancer society that about 7. 5million died from cancer. On the site it shows you maps of different parts of the countries Africa, Europe, Asia, Polynesia, Micronesi a, Melanesia, Australia, South and North and Central America. The table of charts of men and women and overall new cancer cases and deaths of 2007 showed more hundred thousands. Whether if cancer is affecting you or loved one , friends, family , etc. Cancer does not discriminate it can kill any ethnicity black, white, hispanic, asian , etc. This is a long war with cancer and modern medicine has little affect on it. Myself personally did not know too much about cancer. Unfortunately, I had a rude wakening when my sister was first diagnose with stage 4 cervical cancer. It was too late to do really anything she took her chemotherapy and radiation like she was advised too by her doctor. I try to stay optimistic and told her and my family that chemotherapy and radiation will work and that everything would be fine. Unfortunately, the cancer didnt regress and she died at age 29. My family and I didnt understand how could this happen, what is the cause of this. I am the only one in family that is a natural born citizen in America . My family wanted me to explain to them what this cancer is and I didnt know what it was. The only thing I knew was that it kills you once you have it. Shortly after, my sister death we were all still mourning over the loss in our family; then my mom found out that she too had this deadly disease. Unfortunately, she also was first iagnose with stage 4 cancer adenocarcinoma. I research what it was in wikiepedia and it states Adenocarcinoma is a cancer of epithelia originating in glandular tissue. Epithelial tissue includes, but is not limited to, the surface layer of skin, glands and a variety of other tissue that lines the cavities and organs of the body. My own definition is that adenocarcinoma is cancer in your major primary organs your brain, lungs, liver , etc. No primary source that can be identified so then how can you treat the cancer. We tried radiation for the brain and as soon as she was done with her last dosage of radiation. My mom was sent home and she died 2 days after christmas of last year. It is extremely hard for me because I didnt know what to say or do. I just couldnt explain what was happening. That is the reason for keeping the public aware of this killer disease. Todays media advertise mostly sex, products, addictive legal drug and little on cancer. Why is that? Why not more on the number two most killers disease cancer. There are many different types of cancer but, out of all primarily lung cancer is the leading one. Then there is oral cancer which is leading 3 times most then breast and ovarian cancer cases. Why is this not important? Is it something that were eating or is it something that were lacking. Is it something that where inhaling in the air that is polluted or is it just the lack of pure oxygen. The public needs to be aware of this on going battle of Cancer. The more people know the more greater chance we will have to defeat this cancer. cancer. gov/

A Difficult Child

Despite their parents’ great efforts, these children are difficult to deal with and to bring up. During the years, people’s opinion about children who face challenges in controlling their feelings and behavior has shifted from one point of view to another. On the one hand, the blame was placed on parents – somehow it was their fault that their children misbehave. If parents were more understanding, patient and caring, then their children would be good. This view didn’t make any sense to many parents and even put them to a cul-de-sac, because their parenting worked for one of their children, but not for other. On the other hand, the experts came to believe that difficult children are like this because of their innate makeup, they are simply born with certain traits, and it is not their fault. Irritability, indifference, fussiness or aggressiveness in children is seen as part of their nature, and parents have no choice but to learn to live with such traits in their child. Similar essay: Having Children While Young It goes without saying that, dealing with difficult children isn’t an easy task and changes to positive side require a long time. In fact, the older they grow, the more rebellious they are likely to become, that’s why it’s very important to discern the difficulties in the upbringing of the child at his early age. Moreover, parents relate to their children can make a huge difference in how youngsters feel about themselves and respond to their environment. Therefore, parents should become child’s support and encouragement. Children learn by example, they absorb all the information like sponges and the best way to promote good habits and behavior is by practicing parents by themselves. One more vital point for parents is to be more involved in child’s life, it means that family members should always keep a healthy relationship with the kid and create a comfort level that will enable him find relatives helpful and reassuring. The last, but not less significant aspect is making child responsible for his decisions and choices, there should always be a consequence of every action, good or bad. This will make him responsible for everything he does and will require a good amount of thinking before any action is taken. I’d like to conclude by saying that â€Å"a difficult child† is not an illness or medical diagnosis, difficult children are normal, they can become positive, enthusiastic, perhaps even especially creative individuals if they are well managed when young, as well as treated with most care and love, from parents, family members, relatives, teachers or any other people around them. A Difficult Child Despite their parents’ great efforts, these children are difficult to deal with and to bring up. During the years, people’s opinion about children who face challenges in controlling their feelings and behavior has shifted from one point of view to another. On the one hand, the blame was placed on parents – somehow it was their fault that their children misbehave. If parents were more understanding, patient and caring, then their children would be good. This view didn’t make any sense to many parents and even put them to a cul-de-sac, because their parenting worked for one of their children, but not for other. On the other hand, the experts came to believe that difficult children are like this because of their innate makeup, they are simply born with certain traits, and it is not their fault. Irritability, indifference, fussiness or aggressiveness in children is seen as part of their nature, and parents have no choice but to learn to live with such traits in their child. Similar essay: Having Children While Young It goes without saying that, dealing with difficult children isn’t an easy task and changes to positive side require a long time. In fact, the older they grow, the more rebellious they are likely to become, that’s why it’s very important to discern the difficulties in the upbringing of the child at his early age. Moreover, parents relate to their children can make a huge difference in how youngsters feel about themselves and respond to their environment. Therefore, parents should become child’s support and encouragement. Children learn by example, they absorb all the information like sponges and the best way to promote good habits and behavior is by practicing parents by themselves. One more vital point for parents is to be more involved in child’s life, it means that family members should always keep a healthy relationship with the kid and create a comfort level that will enable him find relatives helpful and reassuring. The last, but not less significant aspect is making child responsible for his decisions and choices, there should always be a consequence of every action, good or bad. This will make him responsible for everything he does and will require a good amount of thinking before any action is taken. I’d like to conclude by saying that â€Å"a difficult child† is not an illness or medical diagnosis, difficult children are normal, they can become positive, enthusiastic, perhaps even especially creative individuals if they are well managed when young, as well as treated with most care and love, from parents, family members, relatives, teachers or any other people around them.

Module 1 Case Essay Example | Topics and Well Written Essays - 500 words

Module 1 Case - Essay Example The analysis phase comes first, and it is chiefly concerned with requirement gathering, and that is directly related to business opportunities and needs. It provides the direction for the systems design to follow in achieving the goal of the business. Design, on the other hand, has its primary concern in the construction of the system physically.Its phases and tasks are focused on the aspect of a business model (Abramovici & Stark, 2013). With respect to information technology, a business analyst is usually dealing with issues concerning the development of software or enhancement issue. He does this to resolve various problems that are associated with processes and also functions that exist within an organization. Software development is one of the fields that continue to grow rapidly despite the fact that economic development is slowing down. The Business Analyst may that find his or her profession is in very high demand, as the firms incorporate various functions in order to employ adequate technology to cut down cost (Hoffman, Frederick & Schwartz, 2013). There are some cases in the system development life-cycle (SDLC) may be needed. The role of the business analyst is imperative, therefore, user acceptance testing (UAT) methodologies are essential tools on that are on the road to ensure that there is project completion. The most important key to the success of a business analyst is the ability to treat internal departments, stakeholders and vendors as equity partners that are in a team with the main focus being on ensuring that the project on information technology is completed. One should have a vision of the present situation that a project is primarily designed to solve and the outcomes that the stakeholders are expecting. The major challenge for the business analyst is to try and resolve the problem that exists between the current status quo and also the outcome that is expected. This is seen as the main area

HOW NOVA SCOTIA CAN BE A BETTER PLACE TO LIVE Essay

HOW NOVA SCOTIA CAN BE A BETTER PLACE TO LIVE - Essay Example The modern world requires the establishment of industrial buildings which emits hazardous gases in the atmosphere and toxic wastes in the water systems. Nova Scotia is not exempted from this problem of developed cities. According to Dr Ross, the president of the American Academy of Environmental Medicine, â€Å"Nova Scotia and New Brunswick already have significant problems with indoor air pollution and have an alarming number of cases of environmentally induced illness/chemical sensitivity and asthma† (Allergy and Environmental Health Organization 1). As a citizen of Nova Scotia, each of us should unite in order to fight this problem by ensuring that business organizations operating within our community adhere to the set standard in sustainable development. Furthermore, we should do small acts like cleaning up our yard, segregating and properly disposing our garbage. Literacy is an important issue which is being considered by not for profit institutions which all aim to provide a venue in educating both young and old (Literacy Nova Scotia 1). I believe that in this modern time, our society can better function if all the citizens are literate. If everyone is able to read, write, and comprehend, a level playing field is created where each one is considered for available job opportunities. Literacy also maximizes the potential of an individual and makes learning more efficient. I believe that well educated citizens will be more beneficial to the society as they are able to utilize their capabilities best. Lastly, Nova Scotia will be a better place to live in when everyone upholds moral excellence. The modern world brings with it moral degradation as parents lack the time to mold their children. Immorality causes the soaring number of crimes that we hear of everyday. Thus, in order to ensure peace and security, each of us should identify ways which we can contribute in

Psychology in the development of the society and the human Essay

Psychology in the development of the society and the human civilization - Essay Example Humans move, act and live according to their instincts and these are guiding by the wants and needs of the person but sometimes, the rate of the person's reactions are either accelerated or slowed down according to their psychological judgment. This is actually the influence of motivation to the person's psychological state. Thus, human motivation is the psychological factor that guides the judgment and reaction of the person's towards his or her aim. According to Abraham Maslow, human motivation is usually focused on the benefit that the person can achieved by the acquisition of it and these are actually directed towards the needs and the wants of the person. The benefits are regarded in the psychological aspect as the pleasure achieved by satisfying a specific need. This idea is usually regarded with the term arousal meaning the excitement or sensation acquired through satisfaction. Effects of motivation with regard to the role of arousal can be observed in the daily actions of the people. For example, take a case of a certain teenage boy who is motivated to develop his physique to acquire a muscular build. He endures the challenges enticed with his decision because he is focused on the benefits that his desire will provide on his esteem. Thus, he is motivated to satisfy his needs for personal esteem. Another is a case of a teenage girl who is firmly decided to have a diet. Her case is actually the opposite of the previous case because she is one the side of motivated procrastination to achieved personal satisfaction on the aspect of her personal esteem, which her slim and sexy physique will boost. Accordingly, she her actions will also gratify her safety needs regarding her company because her desires expressed her need for acceptance to her desired social group. In addition, her procrastination will limit her satisfaction regarding food consumption aspect but on the other hand, it will fulfill her physiological need for a healthy lifestyle. Thus, the fulfillment of her psychological needs will give her satisfaction, which is actually the aspect that motivates her. Thus, it is viewed that people's actions and decision are actually products of their desires and needs and the satisfaction that they will achieve by fulfilling that needs that actually motivates them to pursue that their aims. This is a classic example on how outside sources of "social push" actually affects people's personal decisions. Hence, to be able to prove the real essence of the mentioned matter herein, this research shall try to utilize a survey-interview procedure to check on how human individuals actually handle the different elements in the society that makes it certain for their personality to change every now and then. To handle the collection of data for this particular research project of human personality development and social interaction, the researcher decides to utilize the results of a survey report that would be given out to at least 80 participants. On the part of the researcher, the said number of participants is already reasonable enough to make the entire research more accurate in terms of research results. The said 80 students would be

Strategic Marketing-Forecast and Budget Essay Example | Topics and Well Written Essays - 1000 words

Strategic Marketing-Forecast and Budget - Essay Example The portable button will reduce cases of insecurity but the current challenge is to design. Product Development and Testing Hire expertise to develop product 45 Prototype development costs: 140 Labour 240 Materials 130 Subcontracting 210 Special Purpose Equipment 300 Miscellaneous 230 Fees for lab testing 212 Field Trial costs 125 Patent Application Fees 43 Legal Fees re IP 233 Additional marketing research activity 50 Development of technical manuals 65 Development of User training manuals 210 Packaging Design 65 Travel Costs 120 Staffing Costs 230 Update business plan 50 Search for Venture Capital 210 Other related costs: 250 The product marketing and promotion programs are not captured in the product development because they are under the marketing budget. These components are not part of the development process. The development of a gadget connecting security organization with the people demands that the bodies must understand how the system operates. The role of security organ i s to develop the necessary security structure support workability of the product. The success of the whole process depends on the ability to address pertinent issues affecting the product. The trial costs must be monitored because trials are very expensive to address or handle leading to serious challenge for the product development process. ... The product is an IT related programs that must be addressed in issues of communication and the issues of security of the communication practice Market Research & Technical Feasibility costs Product Management Training $100 Other HR training costs $100 Focus Group Costs $100 Brochure Development $145 Costs gathering market intelligence $350 Product mock-up costs $230 Staffing Costs $340 Consulting Costs (idea evaluation, marketing assistance) 210 Technical Review of Product Concept 120 Legal/Professional fees 120 End-user visits 230 Other related costs: 300 New product launch support services New product development and completion do not guarantee success of the product, unless the implementation process is undertaken in a way that will encourage the target market to try out the product. Several launching programs exist, but the company needs to engage in tactical launch of new products. During the process of planning of new product launch, support is required from the top management on the dates of launch, and the facilitation required, in the process to achieve success (Sandhusen, 2000, p. 34). In order to support the tactical and the strategic launch of products, market research must be conducted so as to determine the efficiency of the method chosen for the product launch. Market testing is vital throughout the new product development process. Market testing will allow the organization to finalize the planning process of the product launch. Additionally, the feedback collection process will be efficient if the customers are allowed to give their opinion during the product launch leading to the ease of product improvement in the process

Rock and roll music Essay Example | Topics and Well Written Essays - 500 words

Rock and roll music - Essay Example The speaker in the song is a male lover who has lost his partner. He acknowledges that he is very lonely so that he now found a new place to stay, at the Heartbreak Hotel. He speaks in the first person and so the song effectively communicates the deep emotions of the speaker. Consequently, he is able to present a realistic situation and causes his listeners to empathize with him. Moreover, the narrator uses simple yet vivid imageries which many people understand and relate with. He speaks of a feeling and circumstance which every individual somehow experiences one way or another, a familiar episode which is easily understood by listeners of different ages. Presley, as the speaker and singer, effectively expresses the message of the song through a manner that is not boring or ordinary but through his unique way of singing he was known to be a king of. The text of course tells the pathetic story of a man left by his lover. He now lives alone lonely at heartbreak hotel with other heartbroken people. He says that the men who are there have been crying for so long while the women wore black dresses. Such imagery reflect depressed men and women who did not simply lost their lovers but have lost them forever so that there seems to be no tomorrow. As their love died when their lovers left, they feel that they have nothing or no one to return to but stay at Heartbreak hotel forever. Such despondent atmosphere is emphasized by the equally melancholic music. Although the instruments are quite upbeat, the singer sounds hopeless and seems to really be crying. His pauses and breathes make him sound like a man crying over the death of a loved one. The emotion expressed in the song is quite strong and moving. What makes the song more expressive perhaps is the use of double entendre. For instance, in the third verse, a picture of the hotel attendant

Microbiology Bioremediation Essay Example | Topics and Well Written Essays - 750 words

Microbiology Bioremediation - Essay Example [1] There are a number of cost/efficiency advantages to bioremediation, which can be employed in areas that are inaccessible without excavation. [1] Like hydrocarbon spills or oil spills (specifically, petrol spills) or certain chlorinated solvents may contaminate groundwater, and introducing the appropriate electron acceptor or electron donor amendment, as appropriate, may significantly reduce contaminant concentrations after a lag time allowing for acclimation. [1] An oil spill is the unintentional release of a liquid petroleum hydrocarbon into the environment as a result of human activity. [2] After a spill, hydrocarbons are subjected to physicochemical processes such as evaporation or photochemical oxidation which produce changes in oil composition. But the most important process acting on the spilled oil is biodegradation. [3] There are several ways to clean-up an oil spill in the given scenario and in situ treatment. Microbial Biodegradation through Methanogenesis, using the glycolysis pathway is one way. Bioremediation and Biotransformation methods endeavor to harness the astonishing, naturally occurring, microbial catabolic diversity to degrade, transform or accumulate a huge range of compounds including hydrocarbons such as oil. [1] Bacteria are minute unicellular microorganism, the smallest one having all the necessary protoplasmic equipment for growth and self-multiplication at the expense of available food stuff (Smith,1980) such as hydrocarbon fuel. Every bacterium is covered with a cell membrane known as the plasma membrane which separates it from the cytoplasm of the bacterial cell. Composed of phospholipids and proteins, the plasma membrane is the site of important enzyme systems, including the respiratory enzyme systems or cytochrome enzymes (Smith,1980). In regulating the passage of food materials, like oil, and metabolic by-products between the interior of the cell (where metabolic activities are carried on) and the

Rock and roll music Essay Example | Topics and Well Written Essays - 500 words

Rock and roll music - Essay Example The speaker in the song is a male lover who has lost his partner. He acknowledges that he is very lonely so that he now found a new place to stay, at the Heartbreak Hotel. He speaks in the first person and so the song effectively communicates the deep emotions of the speaker. Consequently, he is able to present a realistic situation and causes his listeners to empathize with him. Moreover, the narrator uses simple yet vivid imageries which many people understand and relate with. He speaks of a feeling and circumstance which every individual somehow experiences one way or another, a familiar episode which is easily understood by listeners of different ages. Presley, as the speaker and singer, effectively expresses the message of the song through a manner that is not boring or ordinary but through his unique way of singing he was known to be a king of. The text of course tells the pathetic story of a man left by his lover. He now lives alone lonely at heartbreak hotel with other heartbroken people. He says that the men who are there have been crying for so long while the women wore black dresses. Such imagery reflect depressed men and women who did not simply lost their lovers but have lost them forever so that there seems to be no tomorrow. As their love died when their lovers left, they feel that they have nothing or no one to return to but stay at Heartbreak hotel forever. Such despondent atmosphere is emphasized by the equally melancholic music. Although the instruments are quite upbeat, the singer sounds hopeless and seems to really be crying. His pauses and breathes make him sound like a man crying over the death of a loved one. The emotion expressed in the song is quite strong and moving. What makes the song more expressive perhaps is the use of double entendre. For instance, in the third verse, a picture of the hotel attendant

Hydrolic Fracking Research Paper Essay Example for Free

Hydrolic Fracking Research Paper Essay Hydraulic fracturing is a process used in nine out of 10 natural gas wells in the United States, where millions of gallons of water, sand and chemicals are pumped underground to break apart the rock and release the gas. Scientists are worried that the chemicals used in fracturing may pose a threat either underground or when waste fluids are handled and sometimes spilled on the surface. The natural gas industry defends hydraulic fracturing, better known as fracking, as safe and efficient. Thomas J. Pyle, president of the Institute for Energy Research, a pro-industry non-profit organization, claims fracking has been â€Å"a widely deployed as safe extraction technique,† dating back to 1949. What he doesn’t say is that until recently energy companies had used low-pressure methods to extract natural gas from fields closer to the surface than the current high-pressure technology that extracts more gas, but uses significantly more water, chemicals, and elements. The industry claims well drilling in the Marcellus Shale will bring several hundred thousand jobs, and has minimal health and environmental risk. President Barack Obama in his January 2012 State of the Union, said he believes the development of natural gas as an energy source to replace fossil fuels could generate 600,000 jobs. However, research studies by many economists and others debunk the idea of significant job creation. Barry Russell, president of the Independent Petroleum Association of America, says â€Å"no evidence directly connects injection of fracking fluid into shale with aquifer contamination.† Fracking â€Å"has never been found to contaminate a water well,† says Christine Cronkright, communications director for the Pennsylvania Department of Health. Research studies and numerous incidents of water contamination prove otherwise. In late 2010, equipment failure may have led to toxic levels of chemicals in the well water of at least a dozen families in Co noquenessing Township in Bradford County. Township officials and Rex Energy, although acknowledging that two of the drilling wells had problems with the casings, claimed there were pollutants in the drinking water before Rex moved into the area. John Fair disagrees. â€Å"Everybody had good water a year ago,† Fair told environmental writer and activist Iris Marie Bloom in February 2012. Bloom says residents told her the color of water changed to red, orange, and gray after Rex began drilling. Among the chemicals detected in the well water, in addition to methane gas, were ammonia, arsenic, chloromethane, iron, manganese, t-butyl alcohol, and toluene. While not acknowledging that its actions could have caused the pollution, Rex did provide fresh water to the residents, but then stopped doing so on Feb. 29, 2012, after the Pennsylvania Department of Environmental Protection (DEP) said the well water was safe. The residents absolutely disagreed and staged protests against Rex; environmental activists and other residents trucked in portable water jugs to help the affected families. The Marcellus Outreach Butler blog (MOB) declared that residents’ â€Å"lives have been severely disrupted and their health has been severely impacted. To just ‘close the book’ on investigations into their troubles when so many indicators point to the accountability of the gas industry for the disruption of their lives is unbelievable . In April 2011, near Towanda, Pa., seven families were evacuated after about 10,000 gallons of wastewater contaminated an agricultural field and a stream that flows into the Susquehanna River, the result of an equipment failure, according to the Bradford County Emergency Management Agency.The following month, DEP fined Chesapeake Energy $900,000, the largest amount in the state’s history, for allowing methane gas to pollute the drinking water of 16 families in Bradford County during the previous year. The DEP noted there may have been toxic methane emissions from as many as six wells in five towns. The DEP also fined Chesapeake $188,000 for a fire at a well in Washington County that injured three workers. In January 2012, an equipment failure at a drill site in Susquehanna County led to a spill of several thousand gallons of fluid for almost a half-hour, causing potential pollution, according to the DEP. In its citation to Carizzo Oil and Gas, the DEP strongly recommended that the company cease drilling at all 67 wells â€Å"until the cause of this problem and a solution are identified.† In December 2011, the federal Environmental Protection Agency concluded that fracking operations could be responsible for groundwater pollution.â€Å"Today’s methods make gas drilling a filthy business. You know it’s bad when nearby residents can light the water coming out of their tap on fire,† says Larry Schweiger, president of the National Wildlife Federation. Whatâ €™s causing the fire is the methane from the drilling operations. A ProPublica investigation in 2009 revealed methane contamination was widespread in drinking water in areas around fracking operations in Colorado, Texas, Wyoming, and Pennsylvania. The presence of methane in drinking water in Dimock, Pa., had become the focal point for Josh Fox’s investigative documentary, Gasland, which received an Academy Award nomination in 2011 for Outstanding Documentary; Fox also received an Emmy for non-fiction directing. Fox’s interest in fracking intensified when a natural gas company offered $100,000 for mineral rights on property his family owned in Milanville, in the extreme northeast part of Pennsylvania, about 60 miles east of Dimock. Research by a team of scientists from Duke University revealed â€Å"methane contamination of shallow drinking water systems that is associated with shale-gas extraction.† The data and conclusions, published in the May 2011 issue of the prestigious Proceedings of the National Academy of Sciences, note d that not only did most drinking wells near drilling sites have methane, but those closest to the drilling wells, about a half-mile, had an average of 17 times the methane of those of other wells. â€Å"Some of the chemicals used in hydraulic fracturing—or liberated by it—are carcinogens,† Dr. Sandra Steingraber told members of the Environmental Conservation and Health committee of the New York State Assembly. Dr. Steingraber, a biologist and distinguished scholar in residence at Ithaca College, pointed out that some of the chemicals â€Å"are neurological poisons with suspected links to learning deficits in children,† while others â€Å"are asthma triggers. Some, especially the radioactive ones, are known to bioaccumulate in milk. Others are reproductive toxicants that can contribute to pregnancy loss.† An investigation by New York Times reporter Ian Urbina, based upon thousands of unreported EPA documents and a confidential study by the natural gas industry, concluded, â€Å"Radioactivity in drilling waste cannot be fully diluted in rivers and other waterways.† Urbina learned that wastewater from fracking operations was about 100 tim es more toxic than federal drinking water standards; 15 wells had readings about 1,000 times higher than standards. Research by Dr. Ronald Bishop, a biochemist at SUNY/Oneonta, suggests that fracking to extract methane gas â€Å"is highly likely to degrade air, surface water and ground-water quality, to harm humans, and to negatively impact aquatic and forest ecosystems.† He notes that â€Å"potential exposure effects for humans will include poisoning of susceptible tissues, endocrine disruption syndromes, and elevated risk for certain cancers.† Every well, says Dr. Bishop, â€Å"will generate a sediment discharge of approximately eight tons per year into local waterways, further threatening federally endangered mollusks and other aquatic organisms.† In addition to the environmental pollution by the fracking process, Dr. Bishop believes â€Å"intensive use of diesel-fuel equipment will degrade air quality [that could affect] humans, livestock, and crops.† Equally important are questions about the impact of as many as 200 diesel-fueled trucks each day bringing water to t he site and then removing the waste water. In addition to the normal diesel emissions of trucks, there are also problems of leaks of the contaminated water. â€Å"We need to know how diesel fuel got into our water supply,† says Diane Siegmund, a clinical psychologist from Towanda, Pa. â€Å"It wasn’t there before the companies drilled wells; it’s here now,† she says. Siegmund is also concerned about contaminated dust and mud. â€Å"There is no oversight on these,† she says, â€Å"but those trucks are muddy when they leave the well sites, and dust may have impact miles from the well sites.† Research â€Å"strongly implicates exposure to gas drilling operations in serious health effects on humans, companion animals, livestock, horses, and wildlife,† according to Dr. Michelle Bamberger, a veterinarian, and Dr. Robert E. Oswald, a biochemist and professor of molecular medicine at Cornell University. Their study, published in New Solutions, an academic journal in environmental health, documents evidence of milk contamination, breeding problems, and cow mortality in areas near fracking operation s as higher than in areas where no fracking occurred. Drs. Bamberger and Oswald noted that some of the symptoms present in humans from what may be polluted water from fracking operations include rashes, headaches, dizziness, vomiting, and severe irritation of the eyes, nose, and throat. For animals, the symptoms often led to reproductive problems and death. Significant impact upon wildlife is also noted in a 900-page Environmental Impact Statement (EIS) conducted by New York’s Department of Environmental Conservation. According to the EIS, â€Å"In addition to loss of habitat, other potential direct impacts on wildlife from drilling in the Marcellus Shale include increased mortality . . . altered microclimates, and increased traffic, noise, lighting, and well flares.† The impact, according to the report, â€Å"may include a loss of genetic diversity, species isolation, population declines . . . increased predation, and an increase of invasive species.† The report concludes that because of fracking, there is â€Å"little to no place in the study areas where wildlife would not be impacted, [leading to] serious cascading ecological consequences.† The impact of course affects the quality of milk and meat production as animals drink and graze near areas that have been taken over by the natural gas industry. The response by the industry and its political allies to the scientific studies of the health and environmental effects of fracking â€Å"has approached the issue in a manner similar to the tobacco industry that for many years rejected the link between smoking and cancer,† say Drs. Bamberger and Oswald. Not only do they call for â€Å"full disclosure and testing of air, water, soil, animals, and humans,† but point out that with lax oversight, â€Å"the gas drilling boom . . . will remain an uncontrolled health experiment on an enormous scale.† Bibliography of Works Cited: http://www.marcellusoutreachbutler.org/ http://www.counterpunch.org/2012/03/19/the-perils-of-fracking/ www.coalitiontoprotectnewyork.org http://psehealthyenergy.net/data/Bamberger_Oswald_NS22_in_press.pdf http://www.scribd.com/doc/97449702/100-Fracking-Victims http://www.nytimes.com/2011/08/04/us/04natgas.html?pagewanted=all http://steingraber.com/ http://frack.mixplex.com/content/scientific-study-links-flammable-drinking-water-fracking http://www.hydraulicfracturing.com/Pages/information.aspx http://www.epa.gov/hydraulicfracture/ http://geology.com/articles/hydraulic-fracturing/

Design and Build Procurement Method

Design and Build Procurement Method If the potential readers of this dissertation within the Middle East region are going to get a better appreciation of the Design and Build procurement method, initially they must understand the advantages and/or disadvantages of this type of procurement method from both the Clients and Contractors perspective. 4.2 Arguments for Design Build Both Ndekugri and Turner (1994) argue that the Design and Build contract is often completed in a shorter duration because of the integration of the design and construction phases of a project. From a Clients perception this is one of the most important benefits this type of arrangement has to offer. Because the design/build Contractor is both designing and constructing the proposed facility, procurement and the construction phase can begin sooner than the more traditional design/bid/ and then build type of procurement arrangement. This time savings tends to results from the project being designed in phases which enables the Contractor to begin the construction works earlier. With the traditional design/bid/ construction arrangement, the Contractor does not normally start building until the Designer has completed the design and the project has been awarded. Both Saxon (2000) and the RICS Iconsult (no date) support this argument; both agree that one of the main benefits of this Design and Build arrangement is that it tends to reduce the design and construction time because they are being done concurrently and allows the Client to start earning revenue sooner than had he elected to use the traditional procurement method. According to Ndekugri and Turner (1994) another important benefit of the DB procurement method is the broad responsibility of the design/build Contractor. In traditional construction projects, problems often occur when the Designer blames the Contractor and vice versa for problems in the operation of the facility. On occasions in traditional construction projects, protracted litigation is necessary to resolve any dispute between the Designer and Contractor when they continue to blame each other for the problems. In design/build contracts, the Design and Build Contractor is responsible for both the design and construction of the project and retains the full responsibility for the outcome of the project, except for matters for which the Client retains responsibility. The Designer and Contractor are the same entity, so blaming each other does not excuse the Design and Build Contractor. The design/build Contractor is completely responsible for both construction and design defects. The Cl ient can recover directly from the design/build Contractor for deficiencies in either design or construction of the project. Therefore, the Client need not determine initially whether a defect was caused by an error in design or construction. In a more traditional construction contract, this issue must be determined so that the Client can establish whether the design professional or the Contractor is at fault. Haskell (no date) believes that another benefit of the Design and Build arrangement is that where the design and construction personnel work together and communicate and solve problems as a team, the Client will benefit from the continuity between Designer and Contractor. In a Design and Build project the same entity has the expertise to design the project as well as the expertise to build the project. Therefore they are unlikely to suffer communication problems, and because they are working as a team, they are better able to optimize the design and better able to evaluate alternative materials and construction methods efficiently. In addition to this, the RICS Iconsult (no date) believes that because the design team and the Contractor are working together as a team, the design is more likely to be buildable. Hughes (1992) argues that Design Build offers a high degree of cost certainty, encourages economical solutions, and enables value to be considered as well as price. The RICS Iconsult (no date) agrees with Hughes, and confirm that providing that the Client does not change their design brief, the Design and Build procurement method is more cost effective and provides more cost certainty than the traditional methods of procurement. Shapiro Hankinson Knutson Law Corporation (no date) also believes that another favourable feature of this arrangement, is that the design/build Contractor is liable for any additional cost that he may incur due to errors, omissions or ambiguities in his drawings and/or specification. In traditional contracts the Client warrants the sufficiency of the specification and drawings, and the Client becomes liable to the Contactor for any increased costs because of deficiencies in the drawings and specifications. In a design/build contract, the design/build Contractor is responsible for design as well as construction. The situation minimises claims for extra payment and the design/build Contractor cannot request extra compensation on account of their own mistakes or assumptions. In some instance, the design/build concept has been taken a step further, thus providing the Client with more options and/or advantages. For example, the design/build Contractor, might offer a turnkey procurement solution, this generally means that they will offer the Client a full package which includes the testing and commissioning of the facility, as well as the training of the Clients staff in the operation of the facility. The concept is that when the facility is finished and ready for handing over, all the Client has to do is turn the key. In some instances the design/build Contractor may also include in their proposal a financing deal for the project. Alternatively the design/build Contractor may offer a BOLT type arrangement i.e. they will build the project, then they will operate the facility for a given amount of time, in consideration for this, the Client will then leases the facility for the defined term and cost, then after the expiry of the term, the ownership of the fa cility is then transferred back to the Client. Schiff Hardin LLP (ii) (no date) argues that only with design/build contracts, is the Client able to obtain performance warranties because the Designer and Contractor are not in a position to blame each other because technically they are a single entity. For example it is common for the design/build Contractor to warrant that a proposed facility when completed will yield a predetermined output (e.g. process 2000 cans of coke per hour). This requirement can then be linked to the liquidated damages clause in the event that the output falls short of the predetermined output for the facility. According to the RICS Iconsult (no date), because the Design and Build Contractor has total responsibility, there will be less claims from the Contractor for the late delivery of information, particularly design information. In most design/build contracts, the contract price is fixed price/lump sums, this gives the Client some degree of price certainty. In summary, some of the proclaimed advantage of the design/build procurement include inter alia:- (i) Clients with limited access to technical consultants or their own in-house technical departments may find such contracts attractive. Similarly it is also perceived that because the design/build Contractor is responsible for design, and construction inclusive of quality, the Client will benefit from the reduced cost of third party inspectorates and contract administration, However you could argue that this is an disadvantage to the Client, because at the end of the day, Contractors and design consultants are profit driven and this situation could lead to a compromise in the quality of the project; (ii) Because the design and construction are integrated and the personnel are working together for a common goal. They are better able to optimise the Design and Build ability of a project. They are better able to evaluate alternative materials and methods of construction. Innovation and team work should result in cost savings. This could be construed to be a disadvantage to the Client, especially if all the innovation occurs during the design development stage, because it is generally only the DB Contractor that will get to see benefits for the cost savings at this stage of a project; (iii) The design/build Contractor is a single-point and both the Designer and builder are jointly and severally liable and/or responsible; (iv) In the event of a latent defect and/or litigation by the Client, the joint financial resources of a design/build Contractor will be greater than those of the individual Designer and builder; (v) Most design/build arrangements will tend to be lump sum in nature, meaning that they will usually offer greater certainty in respect of cost to the Client; (vi) Payment by fixed instalments at certain milestone stages, rather than by evaluation method, may be preferential to both Design/Builder and/or Client; (vii) In the event of a post-completion failure of the project, the Client will not be concerned to discover whether the failure is due to the design on the one hand or defective work or materials on the other; viii) From the design/ build Contractors perspective, due to the increase in risk that is inherent of a Design and Build contract, the reward will be greater i.e. more profit. However with more risk, comes more pain when things go wrong for a Design and Build Contractor; ix) From the perspective of a Design and Build Contractor, due to the specialised nature of a Design and Build arrangement, not all Contractors have the required skill set to undertake projects with the design responsibility. The consequence of this is less competition. However, from a Clients perspective this could be a disadvantage because of the likely hood of higher prices due to the reduction in competition; x) There is no need to wait until the design is 100% complete, therefore the Client will benefit from the speed at which the design gets translated into construction; xi) Theoretically there should be less of an involvement by the Clients consultants, therefore the fees from Consultants should be less. 4.3 Arguments against Design Build Clients should stop thinking that Design and Build arrangements need less input from third parties than the traditional method. Some Clients believe that because they have appointed a design/build Contractor who ultimately has a single point of responsibility, there is no need to appoint a third party inspectorate and/or cost advisor. This belief can compromise the quality of the project, as the Design and Build Contractor will attempt to complete the project as cheaply and quickly as possible. Schiff Hardin LLP (i) (no date) argues that because the Designer is no longer employed directly by the Client, the Client may find it more difficult to access information that would have ordinarily been available to them under a traditional project. The Client may feel that he has less control over the design phase and design intent because the relationship between Designer and Client is not the same had it been in a more traditional project. Similarly the Client in a traditional contract retains the services of the Designer during the construction phase to act as a watch dog for compliance with the drawings and specification. But in a Design and Build contract, the Designer no longer works for the Client and the Designer allegiance is with the DB Contractor Hanscomb (2004) confirms that one of the disadvantages of a Design and Build arrangement, is that disputes often occur when the Employer Requirements are not specific enough and left open to the interpretation of the parties. As a result the Client may perceive that he is getting X, but the design/build Contractors interpretation is Y. As a result the Client may not get what they envisaged. This may also lead to litigation if the parties cannot mutually resolve the difference in interpretation of the Employers Requirements. As confirmed before and by Schiff Hardin LLP (i) (no date), due to the specialised nature of the Design and Build arrangement, the Client may find it difficult to obtain competitive quotations. In addition, this form of procurement method quite often excludes smaller companies who do not necessary have the in-house technical ability to undertake a Design and Build. It is also common for design/build contracts to negotiated rather than be competitively bid because Clients tend to find it difficult to induce Contractors to produce preliminary designs unless they are compensated for their costs. All of these factors could be construed as a disadvantage to the Client because they may not get value for money. Appelbaum et al (2012) argues that the principal disadvantage of traditional Design and Build is that the owner loses control of the design process, since the design professionals primary legal and practical allegiance is to the design-builder rather than the owner. This can create severe conflicts of interest during both the design phase and construction administration. From a design/build Contractors perspective and especially in a competitive tender situation, they are at risk of spending a substantial amount of money on a preliminary design and/or concepts and there is no certainty if they will recover this cost. From a Client perspective they could be perceived as an advantage in a competitive bidding situation because they do not need to compensate the Contractors for their preliminary design costs. It is also commonly believed that it is almost impossible to make any genuine appraisal and/or comparison of the cost of a competitively bid Design and Build tender, especially where their designs differ significantly. Schiff Hardin LLP (no date) maintains that if a Client puts a Design and Build tender out to bid, this inevitably results in a competition to under-design a facilitate without any regard to quality, functionality, and maintainability. It could also be argued that where both the design/build Contractor and Clients lack experience in this type of delivery approach, this could have a huge detrimental impact on the delivery of the project and the expectations of the parties. In other words, if a naive Client and/or DB Contractor believes that the other party is responsible for any deliverable associated with the project, and later it transpires they are not, then an unexpected cost might arise that was not anticipated. Rowlinson (1988) also argues that from the Clients perspective, it is difficult to make a comparison of the various preliminary design proposals submitted by Design and Build Contractors. Each Design and Build Contractor will each develop a concept design that satisfies the Employers Requirements albeit using lots of different methods and/or techniques. According to the RICS (no date), from the perspective of a Design and Build Contractor, the extent of the design responsibility is generally fitness for purposes unless the contract states otherwise. This is more onerous than the normal duty of reasonable skill and care imposed on a design consultant when they are employed by the Client in the traditional role. Conversely, and in my opinion, from the perspective of the Client, this could be construed to be an advantage in the event of a design defect. During the course of this study, it has become evident that here in the Middle East, a Contractor and/or Designer is generally only registered with the concerned authorities to either undertake construction works or design works. It is rare for one entity to be registered to undertake both work classification i.e. designer and builder. Therefore for any organisation that wants to participate in the Design and Build field, they will have to form a consortium of Designer and Contractor; which can be a lengthy and complicated process for the parties, especially when they attempt to agree who has responsibility for each risk and which entity is best equipped to handle the risk. Unless the Client incorporates a mechanism in the contract that gives them the opportunity to have an input into the detailed design, the Clients input into the detailed design will be limited and this may result in the finished article not being as they previously envisaged, which then could then lead to disputes. Conversely, and again in my opinion, if the Client employs a Designer to carry out the detailed design and then by novation, the Client transfers the design liability to the Design and Build Contractor, this could result in higher costs for the Client. This could also have a detrimental effect on the ability of the Design and Build Contractor to optimise the design and construction of the project and to evaluate the merits of alternative materials and construction methods. Schiff Hardin LLP (i) (no date) also believes that from the perspective of the Client, the terms of a Design and Build contract generally favour the Design and Build Contractor. Therefore it is recommended that any Client thinking of using the design and built procurement methods should work closely with a lawyer experienced in construction law and in particular the Design and Build contracts. Conversely, and again in my opinion, the Design and Build contract will generally consider this to be an advantage because the terms of the contract are in their favour. Shapiro Hankinson Knutson Law Corporation (no date) argues that under a lump sum Design and Build arrangement, it can get confrontational on how to determine what money is due to the Design and Build Contractor. The main difficulty is the ability to assess the design/builders progress, particularly where there is no independent party that can arbitrate between the parties and make independent assessment. To overcome this problem it is suggested that milestones stone be incorporated into any contract together with a predetermined sum for payment when the respective milestone are achieved. Generally the Design and Build Contractor will prepare a document to accompany his tender known as the Contractors Proposals. This document sets out his methodology of how they intend to satisfy the performance specifications set out in the Employer Requirements. The Joint Tribunal Council in the UK (2008) warns Clients that in the event of conflict between the Employers Requirements and the Contractors Proposals, the latter are stated to prevail. They further advise Clients that when evaluating tenders, adequate time must be given to checking these proposals, particularly as the contract conditions refer to the Employer having satisfied himself that the Contractors Proposals are acceptable. Similarly the Client should allow adequate time for checking the proposals to ensure that they are getting what they envisaged. Conversely, this could be looked upon as an advantage to the Client, for the DB Contractor may have optizmed the Employers Requirements by introducing innovation and ben eficial alternatives and methods into the Contractors Proposals. An Unknown Author (no date) argues that another disadvantage of the Design and Build contract is that it is not flexible enough to accommodate change. Therefore Clients are advised, that they should avoid change. If is often found that when foreseen and/or unforeseen changes occur, the Clients budget cannot accommodate the additional costs and they are left with no alternative but to either reduce the scope of works and/or comprise on the quality of the project in order to reduce cost. This will inevitably lead to a product that is not what the Client envisaged at the start of the project. Schiff Hardin (ii) (no date) wrote that issues relating to insurance and bonding affect the relationship between the Design and Build parties. Errors and omissions by the Designer are generally excluded from the Contractors insurance policies, and errors and omissions by the Contractor is generally exclude from the insurance policies of the Designer. Surety bonds can also lead to similar problems, for example, performance bonds may not cover design services. Satisfactory bonding or insurance obligations are likely to be either commercially unobtainable or prohibitively expensive. In summary, some of the proclaimed disadvantage of the design/build procurement method include inter alia:- (i) In the traditional Design and Build situation, only if the Client employs third party inspectorates and/or cost advisors at his expense will he be able to safe guard his interests. By doing this, and in my opinion. this appears to be at odds with the concept of a Design and Build contract i.e. the Design and Build Contractor is a single entity that are jointly and severally responsible for both defects in design and workmanship. (ii) Because of the specialist nature of the Design and Build contract, there are only a limited number of Design and Build Contractor that are capable of undertaking work using this arrangement. This consequently results in less competition and ultimately less competition will result in higher prices (iii) From the Clients perspective, compared with the traditional design/bid and construct arrangement, the Client inevitably loses control of both the design and construction phase. Even if they were to engage independent advisors, they have limited influence over the whole process; all they can do is monitor for compliance with the Employers Requirements. (iv) It has been suggested that where it has been possible to compare both forms of delivery methods i.e. Design and Build verse design/bid and the construct; there was little evidence that the optimisation of design and the evaluation of alternative materials and methods of construction have yielded a cost saving for the Client. In my opinion all benefits that occur due to the innovative ideas generally occur post contract and the cost benefits remain with the Design and Build Contractor (v) Particular attention should be given to the drafting of design/build contracts and Employer Requirements because of it bespoke nature. The Client should seek legal advice particularly from a construction lawyer who are well versed in the field of Design and Build projects. This legal advice invariably increases the total cost of the project for the Client. (vi) Where Clients elect to competitively tender a Design and Build project, from the Contractors perspective, the cost of preparing preliminary designs and the tender are generally substantial because the Contractor will have to engage the services of a design professional. This cost will need to be recovered in all subsequent tenders if the Contractor is not successful. In some instances, some Design and Build Contractors will decline to bid and this will unavoidably result in a less competitive environment. vii) Where the Client has elected to appoint a Designer to undertake a relatively detailed design. After which the Client decides to novate both the Designer and their design to the Design and Build Contractor. From a Contractors perspective, this will limit their ability to optimise the design and construction as well as review alternative methods and materials. Conversely from the Clients perspective, he regains control over the design and construction phase of the project. viii) All Clients have a duty to conduct some investigation into the capabilities and experience of the Design and Build Contractor. Particular attention should be paid to the track record of the preferred Contractors. Design and Build Contractors who are relatively new to this form of delivery method can themselves become a problem because of their lack of experience. Wardani et al. (2006) concluded that resourcing is influential to the success of design/build projects where a higher knowledge and understanding of the design-build processes can reduce problems within the combined design and construction phases ix) The Client should where possible avoid changes once the concept design and tenders have been fully evaluated and the Design and Build Contractor has been appointed. If required, any decision for change should be made as quickly as possible. Xiao and Proverbs (2003) argue that variations during the construction stage are risk factors that are disruptive to the achievement of project goals. 4.4 Outcome As stated in 1.4, the objective of this chapter was to critically analyse the benefits of Design and Build procurement method. Having looked at various sources of literature from books, internet websites and journals regarding the Design and Build procurement method, the writer believes that this has been achieved. The next chapter of the report will attempt to ascertain the feelings and attitudes of the construction professionals in the Middle East region to the Design and Build procurement method and to gauge whether there is a future for this procurement method. Chapter 5: Design and Build Case Study 5.1 Introduction To gauge the knowledge, feelings and attitudes of the construction professionals in the Middle East to the Design and Build form of procurement. A survey has been conducted using a 5 page questionnaire (See Appendix xxxxx for a blank copy of the survey). A covering letter accompanied the questionnaire setting out the objective of the study. The response rate to this Questionnaire was a favourable 62%. As stated in 2.6 on this report, the data received from the respondents was collated and analysed using the descriptive statistic method. Bar charts and/or histograms accompanied with the corresponding narrative have been used to present some of the data gathered from the respondents. Questions 1 to 4 Inclusive Initially a series of participant background questions were asked of the respondents, particularly where they lived within the Middle East, and what discipline best described their role in the industry i.e. construction management, commercial. Furthermore, the respondents were asked how many years had they been in the industry, and which sector of the industry they preferred. Approximately 60% of the respondents had been in the industry for more than 20 years. 63% of the respondents favoured the sector of roads and bridges. The respondents all came from a variety of disciplines i.e. 32% from a construction management background, 23% from a commercial background and 14% from a consultants background. With reference to Fig 6 below, 56% respondents respondent came from the Sultanate of Oman, 24% from the United Arab emirates, 4% from Kuwait, 8% from Bahrain, 4% from Saudi Arabia, 4% from Qatar. The purpose of these questions was to ensure that the data provided by the respondents was re liable and could be construed to be representative of the industry in the Middle East region as set out in the objectives contained in 1.4 of this report. Questions 5 to 7 The next series of question was intended to gather data on the type and nature of the organisations that the respondents work for. Again, the purpose of these questions was to ensure and verify that the respondents all came from diverse background and /or disciplines and/or organisations. With reference to Fig 7 below, 25% of the respondents came from a consultants backgrounds and 63% came from a variety of contracting backgrounds, 4% came from developers and 8% came from other sectors within the construction industry. Questions 8 to 13 inclusive To test my preconception that the traditional form of construction procurement method is the most extensively used in the Middle East, and to test peoples attitudes to the various types of procurement methods. The respondents were asked a number of quantitative questions i.e. Q8 Which procurement method did their current project follow? Q9 Which procurement method had they used the most extensively? Q 10 Which procurement method did they prefer? Q 11 Which procurement method did they think is the most extensively used in the region? Q 12 Which one of the Design and Build procurement methods did they want to gain further experience? Q 13 Which procurement method was used the most extensively within the respondents organisation? The surprising result of the data collected for Q8, was that 21% of the respondents confirmed that their current project had followed the Design and Build procurement method. This result is not too dissimilar to Handscomb (2004) findings detailed on page 11 of this report i.e. the use of Design and Build had grown to more than 30% today. The result to question 8 is also in line with the Contracts in Use 2007 Survey undertaken by RICS for the United Kingdom i.e. 21.7% of contracts were procured using the DB procurement method just for the economical down turn. However, this response was contrary to the writers preconception of how extensive the Design and Build procurement method is currently being used in the region. The writer was not expecting the actual use of the Design and Build method of procurement to be so high. The writers preconception was more in line with the results gained from Q11 (see Figure 8 below) i.e. 92% of the respondents believed that the traditional method of procurement was the most extensively used in the region with only 4% of the respondents saying that the Design and Build method was the most extensively used. The factual 21% of projects currently following the Design and Build procurement method (Q8) and the perceived 4% use of the design and built (Q11) is completely at variance with each other, thus indicting that people are not as narrow minded as previously thought, and are more open minded than to the use of alternative procurement methods in the Middle East region, particularly Design and Build. With reference to Fig. 9 below, it was also surprising to see that 44% of the respondents favoured Design and Build method of procurement, and 40% favoured the traditional method of procurement (Q10). Again this response was not in line with the writers hypothesis that professionals in the region are not open to change and other forms of procurement methods other than the traditional construction procurement methods. In response to Q13, 83% of the respondents confirmed that the traditional method of procurement was the most extensively used procurement method by their organisation and 14% confirmed Design and Build. When compared to the answers given in Q10, it could be argued that it is the Employers in the region that are comfortable with the status quo and are not willing to consider change, the answers given by the respondents to Q10 would suggest that there is an appetite for change amongst the workers as they favoured the Design and Build procurement method. Questions 14 to 20 In order to gauge the attitudes of the respondents to the various procurement methods available, the respondents were asked which procurement method was most suited to a particular sector of the construction industry (See Results in Table 1 below). With reference to Table 1 above, the majority of the respondents favoured the Design and Build contract over the traditional form of procurement in all but one scenario. Again these results are at variance to the writers preconceived ideas of people attitudes to the Design and Build procurement method in the Middle East. These result indicate that construction professional in the Middle East are in fact open to the idea of new procurement methods and in particular the Design and Build. This is contrary to the hypothesis contained in 1.2 of the report. Question 21 88% of the respondents confirmed that they had gained some form of experience with the Design and Build procurement method, and only 12% had gained no experience at all (See Figure 10 below). This appears to reinforce the emerging idea that construction professionals in the Middle East would indeed be open to using different procurement methods in the region. Question 22 to 24 inclusive